Jupiter
Cryo HT Beeswax-Paper-Foil Capacitors.
For
productions, a computer controlled wax vacuum impregnation
system was engineered and built by Jupiter Condenser,
and section processing is based on techniques developed
by Western Electric and RCA. This is capable of deep
vacuum and high pressure, providing consistent impregnation
with more gas and moisture removal. New proprietary
measures of strengthening dielectric properties have
been developed and employed which yield higher insulation
resistance and allow greater operating temperatures.
Wax and paper construction yields a very well mechanically
damped capacitor, free from electrostatic and mechanical
ringing.
Specifications:
Dielectric
Type
|
Unbleached
Kraft Capacitor Paper & Beeswax (Naturally rich
in Anti-Oxidants) |
Electrode/Plate
Metal |
Aluminum
Foil |
Axial
Leads |
4N Silver 20 awg |
Working
Voltages |
600V,
Tested at 1200VDC at two stages of production |
Tolerance |
+/-
5% |
Anti-MDI |
No
plastics are used in construction |
Application
Notes:
For
best results keep capacitors as cool as possible, use
common sense. Do not place next to or touching hot resistors
or under-chassis signal tubes that get hot etc. This
is good practice to follow with any capacitors, especially
paper capacitors. Generally for every 10 degree C increase,
component life is diminished by half.
|
Jupiter
HT Flat Stacked capacitors
inside Thrax phono amplifier
|