Jensen
paper in oil capacitors
|
Jensen paper in oil capacitors are among the best
you will find anywhere. Their pure metal foil
paper-in-oil capacitors are used world wide by
DIY audiophiles and high-end amplifier manufacturers.
We have selected some of their most interesting
types for stocking. |
| |
|
Aluminium foil, tinned copper leads,
aluminium housing |
Capacitance
/ Voltage
|
Diameter
x Length (mm)
|
|
€
ex.VAT
|
€
inc.VAT |
| |
|
|
|
|
0,10
uF / 630V |
16
x 33 |
|
13.20 |
15.70 |
0,22
uF / 630V |
19
x 52 |
|
15.30 |
18.20 |
0,47
uF / 630V |
25
x 52 |
|
17.50 |
20.80 |
1,00
uF / 630V |
30
x 71 |
|
21.00 |
25.00 |
These could be called the “standard”
Jensen type of audio signal capacitors. Mainly
used as coupling and by-pass capacitor in high
quality audio electronics. Often used for DIY
upgrades. In most applications it will make
a significant improvement when replacing the
popular metalized plastic film (often polypropylene)
capacitors. This is the Jensen capacitor type,
were you get a lot of sound quality at a reasonable
cost.
|
|
| Copper
foil, silver leads, aluminium housing |
Capacitance
/ Voltage
|
Diameter
x Length (mm)
|
|
€
ex.VAT
|
€
incl.VAT |
| |
|
|
|
|
0,10
uF / 630V |
16
x 35 |
|
21.00 |
25.00 |
0,22
uF / 630V |
25
x 35 |
|
26.40 |
31.40 |
0,47uF
/ 630V |
35
x 35 |
|
34.50 |
41.05 |
1,0
0uF / 630V |
35
x 55 |
|
49.20 |
58.55 |
The conducting elements are pure copper foil,
the leads are pure solid silver, and combined
with the other exclusive materials used for this
capacitor line, we feel that this is one of the
best sounding capacitors you will find. Copper
gives the sound more depth - a kind of a third
dimension. You still get good value-for-money
with the copper foil, because it gives you significant
improvement in sound reproduction compared to
aluminium, and at the same time, the price is
manageable.
|
All
other types and values are available, but as these
are non stock items, with some delay. |
| Jensen
paper in oil
audio signal capacitors
Paper
in oil dielectric high voltage foil capacitors
for coupling applications in tube
or solid state audio equipments.
Many audiophiles think that the oil capacitors
sound warm.
They simply sound correct, with the harmonic
richness of the live music.
•
Paper in oil dielectric aluminium or copper
foil capacitors
• 630V good for coupling applications
in tube or solid state audio equipments.
• Terminal leads are solder-sealed to
eyelets in the end-discs.
• The terminal connected to the outer
foil, the foil closest to the can, is always
marked with a vertical line on the marking.
• Capacitors are encased in aluminium
tube (hermetically sealed) with phenolic paper/rubber
covers.
• Tolerance: 0.1uF or less is -20/+30%,
greater than 0.1uF is -10/+20%.
• Operating temperature range is -40/+85°C
• Max. ripple voltage is the sum of the
peak ripple voltage and the applied DC voltage
should not exceed the DC rating of the capacitor.
• Power factor (loss factor) is tg <
0.008 at 1 kHz
direction
of the coupling capacitor |
|
|
|
|
|
