Jensen
paper in oil capacitors





Jensen paper in oil capacitors are among the best you will find anywhere. Their pure metal foil paper-in-oil capacitors are used world wide by DIY audiophiles and high-end amplifier manufacturers. We have selected some of their most interesting types for stocking.

Other types, values and tensions are available, but as these are non stock items with some delay.


Aluminium foil (630V)
tinned copper leads, aluminium housing

Capacitance / Voltage

Diameter x Length (mm)


Price each
ex.VAT
Price each
incl .VAT
     
 
 
0,15 uF / 630V
16 x 33
 
13.26
16.05
0,47 uF / 630V
25 x 52
 
16.98
20.55



Copper foil (630V)
silver leads, aluminium housing

Capacitance / Voltage

Diameter x Length (mm)


Price each
ex.VAT
Price each
incl .VAT
     
 
 
0,047 uF / 630V
16 x 35
 
21.16
25.60
0,10 uF / 630V
18 x 35
 
21.16
25.60
0,22 uF / 630V
25 x 35
 
24.59
29.75
0,47uF / 630V
35 x 42 or 30 x 60
 
30.87
37.35
1,0uF / 630V
35 x 55
 
42.73
51.70



Copper foil (630V), in paper tube
silver leads

Capacitance / Voltage

Diameter x Length (mm)


Price each
ex.VAT
Price each
incl .VAT
     
 
 
0,10 uF / 630V
32 x 46
 
64.63
78.20
0,22 uF / 630V
32 x 46
 
72.15
87.30
0,47uF / 630V
38 x 64
 
78.06
94.45
1,0uF / 630V
38 x 64
 
83.34
101.45








Jensen paper in oil
audio signal capacitors


Paper in oil dielectric high voltage foil capacitors for coupling applications in tube
or solid state audio equipments.
Many audiophiles think that the oil capacitors sound warm.
They simply sound correct, with the harmonic richness of the live music.

• Paper in oil dielectric aluminium or copper foil capacitors
• 630V good for coupling applications in tube or solid state audio equipments.
• Terminal leads are solder-sealed to eyelets in the end-discs.
• The terminal connected to the outer foil, the foil closest to the can, is always marked    with a vertical line on the marking.
• Capacitors are encased in aluminium tube (hermetically sealed) with phenolic    paper/rubber covers.
• Tolerance: 0.1uF or less is -20/+30%, greater than 0.1uF is -10/+20%.
• Operating temperature range is -40/+85°C
• Max. ripple voltage is the sum of the peak ripple voltage and the applied DC voltage    should not exceed the DC rating of the capacitor.
• Power factor (loss factor) is tg < 0.008 at 1 kHz